TONEWINNER AD-2PRO+ / Class A integrated amplifier - HIGH END
TONEWINNER AD-2PRO+ / Class A integrated amplifier - HIGH END
- 200 W power on 8 ohms
- Total harmonic distortion ≤ 0.05%
- Phono input for MM and MC
- Class A and AB
- Usb
NOT JUST SOUND .
A pure and delicate sound for a great amplifier. Tonewinner AD-2PRO+ is ill with its soft and rich dynamics which are accompanied, however, by sharp and well-present basses.
It is therefore a two-channel hi-end device with 200W of power on 8 ohms. The total harmonic distortion, under normal operating conditions, is less than or equal to 0.05%, while the frequency response ranges from 10 Hz to 95 kHz. At the same time, the signal/noise ratio is greater or greater than 100 dB.
Part of a leading series on the market since 2008, this amplifier continues to surprise audiophiles because of its technical solutions. Starting with its amplification method, which provides for a symmetrical and balanced differential input at the BTL output. All in order to increase the clarity of the sound and a greater balance. It then finds space for a DAC ES9038, which well interfaces with the Phono input for mobile magnet (MM) and mobile coil (MC). Also provided are balanced XLR connections, balanced and unbalanced subwoofer outputs.
AD-2PRO+ is provided with three separate operating modes, made possible by the careful design of the internal circuitry. The listener gets a choice between pure Class A, Class AB and Auto, which provides automatic switching between A and AB.
-
- Support DSD decoding bases on ES9038 chip, lossless audio formats are all supported.
- Support kinds of inputs of USB, MM/MC, OPT, COAX, BALANCE, ANALOG etc.
- Support SW balance, unbalance output; Support double line crossover that favors audiophiles.
- Adopts the well known full balance amplifier circuit design, provide enjoyable sound quality.
- Adopts 860W big toroidal transformer and up to 120,000uF customize capacitors, uses 24pcs Toshiba transistors to guarantee enough power drive, can match with different world high end speakers.
- Internal mechanical design with independent and shield cabinets, makes nearly 0 ground noise.
PARAMETERS
Model AD-2PRO+
THD ≤0.05%(1kHz, A weighted)
Channels 2
SNR ≥100dB(A weighted)
Frequency 15Hz-95kHz(+1/-3dB)
Standby Consumption<0.5W
Power Output 240W(THD=1%, 1KHz, 8Ω, one channel driven)
Impedance 8Ω
Gain 40dB ±1dB
Power Consumption 260W-320W(Class A);70W-110W(Class AB)
N.W. 35.9Kg
Dimension 444x254x460mm